Showing results for 
Search instead for 
Do you mean 

Re: Carbon3D Unveils breakthrough CLIP 3D printing

Filaments, ABS, PLA, Plastic, Metal, Ceramics, Wax, and more
Reply
Contributor
Posts: 35
Registered: ‎03-01-2015

Carbon3D Unveils breakthrough CLIP 3D printing

Protoculture
Posts: 61
Registered: ‎02-08-2015

Re: Carbon3D Unveils breakthrough CLIP 3D printing

Thanks for this one. A good write up from Brian at http://3dprint.com/

 

Highlighted
New around here
Posts: 1
Registered: ‎03-25-2016

Re: Carbon3D Unveils breakthrough CLIP 3D printing

thanks for this information

Carbon Fiber PLA Specification
  • Flexural Strength: 57 MPa
  • Melting Temperature: 190°C - 230°C
  • Tensile Strength: 45.5MPa
  • Elongation at Break Smiley Sad73°F) 320%
  • Standard Tolerance :± 0.05mm
  • Layer Thickness : 3mm
  • Shore Hardness :45D
  • Density: 1.3 g/cm3 (1300 kg/m3)
  • Heat Deflection: 21% to 85°C
  • Shrinkage: Very Low, When Cooling to Elevated Ambient Temperature

What Is Carbon Fiber PLA? Carbon Fiber Reinforced PLA is a wonderful material, strong, lightweight, excellent layer adhesion and low warpage. It has excellent layer adhesion and low warpage. Carbon Fiber PLA strength is hiagh compare to other 3d printing materials. Carbon Fiber filament isn't 'stronger' likewise other 3D materials, rather, it is more rigid. Increased rigidity from the carbon fiber means increased structural support but decreased overall flexibility. It is slightly more brittle then regular PLA When printed, this material is a dark glossy black that glitters slightly in direct light.